How to Clean Dyson V7 Vacuum Cleaner: A Step-by-Step Guide

V7 is an effective and versatile cordless vacuum, but it needs regular maintenance, like other vacuums, to ensure ideal overall performance. Whether you’ve got the motorhead, Animal, Fluffy, or every other variation of the V7, the cleansing method is fairly straightforward. Just follow this guide to keep your V7 performance at peak efficiency.

Preparing for Cleaning

Before you begin, gather your gear:

• A huge flat-headed screwdriver
• A T10 Torx screwdriver
• A T8 Torx screwdriver
• A damp cloth
• A small brush

Ensure you have an easy workspace and keep in mind laying down a few newspapers to capture any debris.

Cleaning the Main Drive Head

Many people are unsure how to clean v7 head properly. It’s very important to know how to do this, as the motorhead can gather hair, fluff, and debris that can negatively impact its performance. Follow these steps:

1. Use a big flat-headed screwdriver to remove the side panel.
2. Twist the panel and pull it out to access the Dyson roller brush.
3. Remove any debris and clean off any hair or fluff.
4. Use a damp cloth to clean the inside of the force head.
5. Reassemble the drive head by following the steps in reverse order.

Emptying the Dustbin

The dustbin on the V7 is easy to drain, and this needs to be completed regularly:

1. To open the dustbin, pull the red release handle.
2. Empty the contents directly into the trash bin.
3. Remove the bin from the vacuum by pressing the red button and pulling it away.
4. Rinse the bin below warm water and let it dry in a single day earlier than reattaching it.

By following the above-mentioned steps you can get the information to empty it.

Cleaning the Motor Unit

It is necessary to check the motor unit for dust and residue. If you find any dust and residue in it then you must clean it.

1. Inspect the location across the motor for any dust.
2. Use a brush to eliminate any debris.
3. If needed, remove the battery by unscrewing the two screws on the back of the unit.
4. Replace the battery if necessary or reattach the existing one.

You can get the new battery from the vacuum wizard store.

Dyson V7 Filter Cleaning Steps

If you don’t know how to clean dyson v7 filter then this is the best place to find the steps of filter cleaning. The filter out is washable and should be wiped clean regularly:

1. Remove the filter from the top of the vacuum.
2. Rinse it underneath warm water till the water runs clean.
3. Let the filter dry completely, preferably overnight, earlier than reinserting it into the vacuum.

If your vacuum filter is damaged, you may need to replace your vacuum filter with a new dyson V7 filter.

Deep Cleaning the Vacuum

For a more thorough cleaning, you will need to disassemble some components of your vacuum:

1. Use a flat-headed screwdriver to remove the outer shroud by disengaging the clips.
2. Remove any dirt or particles by brushing.
3. Use a slightly damp, lint-free cloth to wipe the rubber seals clean before reassembling.
4. With a T8 Torx screwdriver remove the internal screws and ease the inside of the vacuum.
5. Rinse the plastic parts underwater, however, ensure they are completely dry earlier than reassembly.

If any part of your V7 vacuum is damaged, purchase dyson V7 parts from its category page.

Reassembling the Dyson V7

After all parts are clean and dry, it’s time to reassemble your vacuum.

1. Reattach the outer shroud, making sure it clicks into place firmly.
2. Reinsert the filter and tighten the screws back into position.
3. Reattach the dustbin by aligning it with the purifier and pressing it securely until you hear a click.

Conclusion

Cleaning your vacuum regularly will make sure it operates at peak performance and extends its lifespan. By following these steps, you can maintain your vacuum’s performance and experience a cleaner domestic environment.

FAQs on Cleaning the Dyson V7 Vacuum Cleaner

How often should I clean my Dyson V7?

Clean your v7 dustbin and filter monthly, more often if used heavily or with pets.

Can I wash the filter of the Dyson V7?

Yes, you can wash the filter under warm water until the water runs clear, then let it dry completely overnight before reinserting it.

What should I do if the suction power decreases?

To increase suction, clean the filter, dustbin, motor unit, and check for hose/head blockages.

Can I use a wet cloth to clean the Dyson V7?

Use a damp cloth to clean the exterior and some internal components, but avoid getting electronics wet.

Can I wash the dustbin under water?

Yes, you can rinse the dustbin under warm water but ensure it’s completely dry before reattaching it.