The Dyson V6 is a popular vacuum cleaner, and just like any device with a battery, its battery will need replacing. If your cordless vacuum cleaner shows a red flashing light that blinks more than 12 times, it’s a sign that the battery needs changing. Luckily, replacing the battery is quite a straightforward process.
Dyson V6 Battery Replacing Signs
If its doesn’t hold a charge.
If unexpectedly shuts off.
If you see a red flashing light that blinks more than 12 times
When you see these signs on your vacuum cleaner then replace battery.
What You’ll Need to Replace the Battery:
A new battery
A screwdriver with a cross-shaped head (Phillips head screwdriver)
Battery Replacement Steps
Here are the steps for replacing the battery and follow these steps and replace battery by yourself.
Unplug your vacuum from the charger.
Look underneath the vacuum to find three screws holding the battery in place.
With the help of Phillips screwdriver, unscrew and remove the 3 battery screws.
Carefully take out the old battery from your vacuum cleaner.
Dispose of the old battery properly, don’t throw it in your regular trash.
Slide the new dyson v6 battery into your vacuum cleaner and line up the screw holes.
Use the three screws you removed earlier to secure the new battery in place.
Congratulations! You have now successfully replaced the battery on your Dyson V6.
Helpful Tips
Ensure your vacuum is turned off and unplugged before starting.
Don’t tighten the battery screws too much.
If removing the old battery is tricky, try using a plastic pry tool to gently loosen it.
Properly recycle the old battery at a local electronics recycling center.
Conclusion
Changing the battery is a simple process that only takes a few minutes as you have been read the guide. Keep your vacuum working at its best by following these simple steps.
